• 1.3302, DIN S12-1-4, AISI T15, no Co round bar
  • 1.3302, DIN S12-1-4, AISI T15, no Co forging
  • 1.3302, DIN S12-1-4, AISI T15, no Co sheet
  • 1.3302, DIN S12-1-4, AISI T15, no Co flat bar
  • 1.3302, DIN S12-1-4, AISI T15, no Co pipe
Home > Tool Steel > 1.3302, DIN S12-1-4, AISI T15, no Co

1.3302, DIN S12-1-4, AISI T15, no Co

We can produce 1.3302, DIN S12-1-4, AISI T15, no Co stainless steel round rods, 1.3302, DIN S12-1-4, AISI T15, no Co forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.3302, DIN S12-1-4, AISI T15, no Co chemical composition and 1.3302, DIN S12-1-4, AISI T15, no Co mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

Production specification

Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.

 11.3302, DIN S12-1-4, AISI T15, no Co

Designation by Standards

 

Brand Name LH  No. Mat. No. DIN EN AISI
BRW1 871 1.3302 S12-1-4 - T15, no Co



Chemical Composition (in weight %)

C Si Mn Cr Mo Ni V W Others
1.28 max. 0.45 max. 0.40 4.15 0.85 - 3.75 12.00 -



Description
High performance high speed steel with durability and a good degree of toughness.

Applications
The steel is used for special tools, which are predominantly manufactured from plates e.g. tufting knives and loopers in the carpet industry as well as slot cutters or wood machining blades. Some steel bar applications using complicated tools require optimum dimensional stability at increased operational temperatures, e.g. for viscose pump housings.

Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 217
Density [g/cm3]: Approx. 8.40

Soft Annealing
Heat to 820-850oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 265.

Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to 600-650oC, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.

Hardening
Harden from a temperature of 1220 - 1260oC followed by oil or warm bath quenching at 550oC.

Tempering
Tempering temperature: 550-570oC, at least 2x for 64 - 66 HRC.

Tempering Temperature (oC) vs. Hardness (HRC)

100oC 200oC 300oC 400oC 450oC 500oC 550oC 600oC 650oC
65.0 63.0 61.5 62.0 62.5 64.0 65.0 63.0 58.0

Forging
Hot forming temperature: 1100-900oC.

Machinability
No data.

Corrosion Resistance
Corrosion resistance of this alloy is better than that of plain carbon steels. However it will rust unless given protective treatment.

Mechanical properties

1.3302, DIN S12-1-4, AISI T15, no Co Mechanical properties,Our production completely according to the 1.3302, DIN S12-1-4, AISI T15, no Co standards to meet the 1.3302, DIN S12-1-4, AISI T15, no Co mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.3302, DIN S12-1-4, AISI T15, no Co mechanical properties.

Heat treatment

1.3302, DIN S12-1-4, AISI T15, no Co Heat treatment,Our production completely according to the 1.3302, DIN S12-1-4, AISI T15, no Co standards to meet the 1.3302, DIN S12-1-4, AISI T15, no Co Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.3302, DIN S12-1-4, AISI T15, no Co Heat treatment.

Machining

1.3302, DIN S12-1-4, AISI T15, no Co Machining,Our production completely according to the 1.3302, DIN S12-1-4, AISI T15, no Co standards to meet the 1.3302, DIN S12-1-4, AISI T15, no Co Machining, can also according to the customer request, to meet the requirements of customers of 1.3302, DIN S12-1-4, AISI T15, no Co Machining.

Welding performance

1.3302, DIN S12-1-4, AISI T15, no Co Welding performance,Our production completely according to the 1.3302, DIN S12-1-4, AISI T15, no Co standards to meet the 1.3302, DIN S12-1-4, AISI T15, no Co Welding performance, can also according to the customer request, to meet the requirements of customers of 1.3302, DIN S12-1-4, AISI T15, no Co Welding performance.

Related hot word search:1 3302 DIN S12-1-4 AISI T15 no Co round bar 1.3302, DIN S12-1-4, AISI T15, no Co,forging 1.3302, DIN S12-1-4, AISI T15, no Co,1.3302, DIN S12-1-4, AISI T15, no Co sheet,coil 1.3302, DIN S12-1-4, AISI T15, no Co,1.3302, DIN S12-1-4, AISI T15, no Co flat bar,pipe 1.3302, DIN S12-1-4, AISI T15, no Co,1.3302, DIN S12-1-4, AISI T15, no Co Lrregular

Prev:1.3207, DIN S10-4-3-10, AISI T42
Next:1.3318, DIN S12-1-4