Heat-resistant steel A387 F5, Grade 5, Gr.5, Gr.3, 501, 1.7362, X12CrMo5, X11CrMo5, 12CrMo19-5, UNS S50200 is an alloy chromium molybdenum pressure vessel steel plate designed for use in boilers, pressure vessels and heat exchangers at high temperatures.
ASTM A387 Grade 5 is defined by the ASTM/ASME A387/A387M standard differs from the other grades covered by the standard in the chromium and molybdenum content of the steel.
Main use A387 Grade 5 in heat exchangers, boilers and pressure vessels and in a wide variety of ancillary uses such as pipes, flanges and fittings.
X12CrMo15 is a heat-resistant grade also classified as boiler steel for pressure applications and operation at elevated temperatures. It exhibits good strength properties at elevated temperatures and resistance to hydrogen under pressure.The grade is used for work with load and pressure up to 100 atm, at temperatures 450 - 600 ℃. It is mainly used in the form of pipes, sheets and hot-rolled bars in the production of oil cracking equipment in refineries, containing 0.75% Sulfur medium. Higher alloy grades with 7-9%. chromium content are selected for higher concentration of SulfurIn addition to the basic purpose, steel is also used in the manufacture of apparatus for hydrogenation of coal, ammonia synthesis equipment, superheaters and air heaters, parts of steam boilers, screws or bolts operating in aggressive conditions, turbine blades, pump parts, covers or springs of manometers.In the F5 or Grade 5 grade and replacements are delivered, among others: hot-rolled pipes, bars and sheets in annealed condition. The applied treatment is usually chosen due to the fine grain size of the structure. The delivery condition is also +NT1 and +NT2 (+QT). In addition to pipes, hot-rolled sheets and bars are also produced. The welding process requires preheating heating and maintaining the temperature of the welded place, and after welding the re-annealing.
| Grade | Chemical Composition WT % | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Mn | Si | P | S | Cr | Ni | Mo | V | Al | Cu | N | |
| X11CrMo5, 1.7362 | 0.08 - 0.15 | 0.3 - 0.6 | 0.15 - 0.50 | Max 0.025 | Max 0.010 | 4.0 - 6.0 | 0.45 - 0.65 | Max 0.04 | Max 0.3 | |||
| X12CrMo5, 1.7362 | 0.10 - 0.15 | 0.3 - 0.6 | Max 0.5 | Max 0.020 | Max 0.005 | 4.0 - 6.0 | Max 0.3 | 0.45 - 0.65 | Max 0.3 | Max 0.012 | ||
| 12CrMo19-5 | 0.08 - 0.15 | 0.3 - 0.6 | Max 0.5 | Max 0.025 | Max 0.020 | 4.0 - 6.0 | 0.45 - 0.65 | |||||
| Z10CD5-05, Z 10 CD 5-05 | Max 0.15 | 0.3 - 0.6 | Max 0.35 | Max 0.020 | Max 0.015 | 4.0 - 6.0 | 0.45 - 0.65 | Max 0.04 | Max 0.3 | |||
| 15Ch5M, 15Kh5M, 15Х5М | Max 0.15 | Max 0.50 | Max 0.50 | Max 0.030 | Max 0.025 | 4.5 - 5.5 | 0.45 - 0.65 | |||||
| X16CrMo5-1, 1.7366 | Max 0.18 | 0.3 - 0.8 | Max 0.4 | Max 0.025 | Max 0.015 | 4.0 - 6.0 | 0.45 - 0.65 | |||||
| A387 Gr.5, grade 5, F5, T5, K41545 | Max 0.15 | 0.3 - 0.6 | Max 0.5 | Max 0.030 | Max 0.030 | 4.0 - 6.0 | Max 0.5 | 0.44 - 0.65 | ||||
| BS 625 | Max 0.15 | 0.3 - 0.6 | Max 0.5 | Max 0.030 | Max 0.030 | 4.0 - 6.0 | Max 0.3 | 0.45 - 0.65 | Max 0.2 | |||
Tensile strength, Rm, Min 450-630 MPa
Yield point, Re, Min 300 MPa
Elongation, A, Min 20%
Impact energy KV2, Min 40 J
Tensile strength, Rm, Min 480-660 MPa
Yield point, Re, Min 300 MPa
Elongation, A, Min 20%
Impact energy KV2, Min 40 J
Tensile strength, Rm, Min 510-690 MPa
Yield point, Re, Min 320 MPa
Elongation, A, Min 20%
Impact energy KV2, Min 40 J
Tensile strength, Rm > 390 MPa
Yield point, Re > 215 MPa
Elongation, A > 22%
Hardness: < 170 HB
Normalizing and Quenching: 920-970°C
Tempering: 680-750°C
ASTM A387 F5, Gr.5, Grade5, A1012 grade T5, A182 grade F5, A199 grade T5, A200 grade T5, SA 213 type T5, SA 182 type F5, UNS K41545, UNS S50100, UNS S50200, A336 Grade F5, A387 Grade 5, A369 Grade FP5, 15Ch5M, 15Kh5M, 15Х5М, 12Cr5Mo, 1Cr5Mo, S45110, CSN 17102, 1.7362+I, 1.7362+NT1, 1.7362+NT2, 1.7366, X11CrMo5, X11CrMo5+I, X11CrMo5+NT1, X11CrMo5+NT2, X12CrMo5, X16CrMo5-1, Z 10 CD 5-05, Z10CD5-05, Z 15 CD 5-05, Z15CD5-05, 12CrMo19-5, 12 CrMo 19-5, BS 625, 12CrMo20-5, 10Cr20Mo6, A16CrMo20-5KW, B16CrMo20-5KG, SCMV 6-1, SCMV 6-2, SFVA F5A, SFVA F5B, STBA25, STFA25, STPA25, 10MoCr50, F-240.B, A-240.B.
Steel grade
Special steel