Stainless Steel specifications held in the austenitic, martensitic and precipitation hardening varieties. Stocks are held in British Standard and International standards. Below is listed our most commonly supplied grades; please contact our sales office. Also stock is 301 stainless spring temper rolled strip.
Cutting steel (free cutting steel) in the steel added a certain amount of one or more of sulfur, phosphorus, lead, calcium, selenium, tellurium and other cutting elements, in order to improve the cutting of steel. Also known as the automatic machining of steel, referred to as auto steel. Such steel can be larger at higher cutting speeds and cutting depth.
Steel mould and Steel mould suppliers, global delivery, stock supply Steel mould steels.
Heat resistant steel. AS Orlov Izobret. Mashinostr. 3, 48-49, 7/2000. The purpose of this work was to increase plasticity of heat resistant steel after aging at the 500-1300 deg C temperature and to improve its operational reliability.
Comprehensive stocks held of tool steel, including hot work, cold work and plastic mould tool steel specifications. Below we detail our most common grades. Other British Standard and international special steels and tool steels are also available, please contact our sales office.
Supplies Ball bearing steel of all types, along with carbon steel and specialty balls, to OEM's around the world. Also offers platinum balls, brass balls, gold, titanium, aluminum, carbon and plastic balls.
Carbon spring steel is held in a wide range of sizes. Detailed below are our most common specifications. Carbon steel strip and spring steel sheet is available most commonly in the hardened and tempered condition, though certain sizes are available in the annealed condition. Round and flat bar is stocked in the as rolled condition. Most spring steel specifications are held to British Standard steel specifications including BS1449 & BS970.
Alloy steel is steel alloyed with a variety of elements in total amounts of between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is somewhat arbitrary: Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0 %. Most commonly, the phrase "alloy steel" refers to "low alloy" steels.
Single Figures are Maximums 0.47/0.57 C, 8.00/10.00 Mn, 0.25 Si, 20.00/22.00 Cr, 3.2/4.5 Ni, 0.38/0.50 N, Bal. Fe A nitrogen-strengthened, austenitic alloy. Has been used in heavy-duty valve applications for internal combustion engines.
DIN 1.4112 1.4113 1.4116 1.4117 1.4120 1.4122 1.4301 1.4303 1.4305 1.4306 Stainless Steel
Introduction to Our Products:
Specialized high quality steel
We have the advantages of equipment, technologies and price
Forging/hot rolling/ extrusion of steel
Round bar steel: 1mm to 2000mm
Square-shape steel: 35mm to 600mm
Plate steel:0.1mm to 800mm
Width: 10mm to 1500mm
Length: We can supply any length based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-219 mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirement
Excellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.