Product categories

More »

Stainless steel

Stainless Steel specifications held in the austenitic, martensitic and precipitation hardening varieties. Stocks are held in British Standard and International standards. Below is listed our most commonly supplied grades; please contact our sales office. Also stock is 301 stainless spring temper rolled strip.

Hi-Steel HSLA-80

Hi - Speed, high Speed Steel Tool Steel (made) : highly processed into the Tool Steel, carbon content high, while containing cr quantity is low (about 4%), reason burnish of Steel surface gloss darker, after heat can reach by HRc62 high hardness, resistance to rust performance not on a roll.

Steel mould

Steel mould and Steel mould suppliers, global delivery, stock supply Steel mould steels.

Heat resistant steel

Heat resistant steel. AS Orlov Izobret. Mashinostr. 3, 48-49, 7/2000. The purpose of this work was to increase plasticity of heat resistant steel after aging at the 500-1300 deg C temperature and to improve its operational reliability.

Tool steel

Comprehensive stocks held of tool steel, including hot work, cold work and plastic mould tool steel specifications. Below we detail our most common grades. Other British Standard and international special steels and tool steels are also available, please contact our sales office.

Ball bearing steel

Supplies Ball bearing steel of all types, along with carbon steel and specialty balls, to OEM's around the world. Also offers platinum balls, brass balls, gold, titanium, aluminum, carbon and plastic balls.

Spring steel

Carbon spring steel is held in a wide range of sizes. Detailed below are our most common specifications. Carbon steel strip and spring steel sheet is available most commonly in the hardened and tempered condition, though certain sizes are available in the annealed condition. Round and flat bar is stocked in the as rolled condition. Most spring steel specifications are held to British Standard steel specifications including BS1449 & BS970.

Alloy steel

Alloy steel is steel alloyed with a variety of elements in total amounts of between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is somewhat arbitrary: Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0 %.[1][2] Most commonly, the phrase "alloy steel" refers to "low alloy" steels.

News

More »

Enterprise email

Home » Stainless steel » Product introduction

080M46

  • Numbers: 20101221024
  • Model: 080M46, BS970
  • Producers: China
  • Update time: 2010.12.21
  • Browse:

Product Description:

080M46 is an unalloyed medium carbon steel and is commonly supplied in the as rolled or cold drawn condition. In its supply condition 080M46 exhibits good tensile and yield properties. With higher carbon than standard medium carbon steel grades 080M46 can be flame or induction hardened to a good hardness.
080M46 is available from stock in bar and can be cut to your requirements. We also offer 080M46 plate flame cut to your required sizes and normalised.

 

TYPICAL ANALYSIS

080M46 

 

C.

Si.

Mn.

S.

P.

0.45%

0.25%

0.80%

0.015%

0.015%


Forging:
Heat slowly and uniformlythe 080M46 tool to 1100°C. After forging cool slowly.

Annealing:
Heat uniformly to 700°C. Soak well and cool slowly in the furnace.

Hardening:
Heat the 080M46 component uniformly to 820/840°C until heated through. Quench in oil, or water.

Tempering:
Heat uniformly and thoroughly at the selected tempering temperature, between 550/660°C and hold the 080M46 tool at heat for one hour per inch of total thickness.

Normalising:
Normalise at 840-870°C, and cool in air.

Stress Relieving:
After rough machining 080M46 tools should be stress relieved.  Soaking time 2 hours after the whole piece has attained a temperature of approximately 675°C. Cool in furnace to approximately 500°C, and then freely in air. 

 

Stainless Steel Suppliers | Hi-Steel HSLA-80 | Steel mould | Heat resistant steel | Tool Steel | Ball bearing steel | Spring steel | Alloy

Copyright 2003 - 2011 China longhai special steel Co., LTD is mainly engaged in all kinds of stainless steel 630 production, wholesale, retail enterprises

TEL:+86-816-3653779 | FAX:+86-816-3639422 | E-mail:sales@special-steel.com | Add:China's sichuan JiangDongLu jiangyou 119 | Zip: 621701